아래에 있는 2.2 프로요 버전에서 2.3 pda 버전만 변경하여 사용하면 됨..

이것을 몰라서 6시간 투자을 하였음.ㅡㅡ;;
갤탭도 먹통이 되어서 긴장..

자세한 내용은 내일.. 퇴근시간이라서..ㅋ

구글 검색을 하다 보니 이것을 찾게 되었다.
처음엔 안 보이더니, 시간을 투자하면 생기는듯..ㅡㅡ;;
프로요지만, 이전 블로그에서 2.3 다운 받아서 하면 될듯..

http://androidadvices.com/how-to-update-samsung-galaxy-tab-p1000-to-xwjmk-froyo-2-2-firmware/

For all the Galaxy Tab P1000 owners there’s a great news for all of you as you too can taste all the latest firmware to your Samsung Galaxy Tab, we have been expanding the firmware upgrading database from firmware upgrade guides for Samsung Galaxy S to HTCs to the Motorola’s etc. So, now let’s check out on how you can flash your Samsung Galaxy Tab P 1000 with the latest firmware build release which is XWJMK 2.2 version. The best part of this is that this has got a minute tweaks in terms of Samsung’s virtual keyboard adding to the list it has also got a better Samsung’s Touch Wiz experience with some tweaks in this one too.

So, before we proceed you need to understand that this is not an Official public release ROM though such beta releases are the test releases which Samsung gives out to its beta tester and we just extend this program with you in the form of these tutorials, so we have no responsibility if your Galaxy Tab get damaged as bricked, however we will try to help you out as much as possible and in a very rare case the Galaxy Tab gets bricked. Rest assured if you follow the procedure as it’s mentioned below there is no way that you will be able to brick or lock your Samsung Galaxy Tab. Do, ensure that the firmware which you will be upgrading is only on Samsung Galaxy Tab with the model number as P1000 and nothing else and also this firmware update is not applicable for all those whose Galaxy Tab is either Network specific or Locked as this will brick your Galaxy Tab. Only Network free Galaxy Tabs can be updated with the procedure mentioned below.

So, if you are new to the firmware upgradation process, you will have to ensure that you have created a backup of all Contacts, Messages, Applications, Images, and Videos as in the due course of the firmware update your device will be completely wiped which will eventually erase all the things in your phone, though after creating the backup you can easily restore back all the contents including the Call log too. Also, ensure that the phone is charged more than 50% so as to facilitate the smoother firmware update as the firmware update generally requires higher battery life though higher the battery life is always better. Also, ensure that all antivirus, firewalls etc. are closed as these may interrupt the process of updation. Most importantly close entire operations of the KIES software suite on your computer as this may interrupt the installation process. Also, it’s recommended to remove memory card or the SIM card if any so as to further ensure that data is not lost in these mediums. Also, installing this firmware doesn’t mean that it will root the device or void the warranty only when you Root the Galaxy Tab, the warranty gets void.

Procedure to update Galaxy Tab P1000 with Froyo 2.2:

• First up you will have to download the Complete XWJMK firmware flash kit from here after which you will have to open the Odin’s exe file from the downloaded package after which you will see that a pop up screen will be launched which will look like the below shown screen shot.

• Now, after opening the Odin, in the Option list as shown below, you will have to check all the options in the Option field which are “Re Partition”, “Auto Reboot” and also the “F:Reset Time”. Now, as soon as you update all the option fields with the check marks as shown in the red circle below, you will have to next choose the PIT file.

• Next up you will have to put your phone in the download mode which can be done by pressing the download mode and then by holding the volume down button you will have to switch ON the device as shown in the below pictured manner.

 

• So, after entering in the download mode successfully you will have to connect your device to the computer with the data cable and need to make sure that the ID:COM box glows yellow which means that all the device drivers are loaded successfully and you are ready to proceed for the rest of the steps ahead. You will have to enter in the options as mentioned below,

PIT – P1_add_hidden.pit,

PDA – P1000XWJMK-REV03-ALL-CL900323.tar.md5,

Phone – MODEM_P1000XXJMA.tar.md5 &

CSC – GT-P1000-CSC-PHNJM5.tar.md5

• Now, there you go you can now hit on the Start button after which you will have to wait for a while till the Green colored “PASS” box is not shown up which is shown below. It may take 3-5 minutes to show up this box.

• Now, next up you will have to click on the Reset button and then you need to just simply un check the “Re Partition” box and then you will have to select the PDA, Phone and CSC files which are in the downloaded zip file of the firmware n the respective options as shown in the below screen shot.

• After this remove the battery and then enter into the download mode as by the above mentioned method by putting the battery again into the device after which selecting all the options like PDA, Phone and CSC you need to click on the start button as shown below after seeing the Green colored PASS button.

So, that’s it you have now successfully upgraded to the new latest firmware of XWJMK Froyo 2.2 version for your Galaxy Tab. Now to simply find via the code whether you have upgraded the firmware or not successfully, all you need to do is to just simply enter in the code as *#1234# after which you will be able to see the device’s version number along with the firmware version in detail easily. Do, let us know if you face or any issues while updating the firmware of your Samsung Galaxy Tab.

Password – androidadvices.com

Apps:

1) Wikihood-gps location and travel info and history

2) Zite-for collected global newsprint articles

3) Free wifi-to locate free wifi hotspots nearest you

4) Open table- for online local and international restaurant reservations. You receive points per reservation which translate to gift certificates

5) WeatherEye HD by weather network-for daily weather (you can program favourite cities)

6) Trip Advisor- for global hotel reviews

7) Xe currency exchange

8) Kayak HD- for airfare comparison. Input desired flight and receive instant global prices in your desired currency

UML Sequence Diagram in Visio 2007

Step by Step: Windows 7에서 백업 설정 및 백업하기

출처: http://support.microsoft.com/kb/978329/ko

왜 폴더를 밖으로 보냈는지 모르겠다.
백업 폴더 아래에 넣었으면 더 깔끔한텐데..
나중에 찾아 봐야겠다.

1. [시작]
   
   클릭 후 검색 상자에 백업을 입력하면 나타나는 결과에서 [백업 및 복원]을 클릭하세요.
   
   
   
   
   
2. 사용자 파일 백업 또는 복원 화면에서 백업의 [백업 설정]을 클릭하세요.
   
   
   
   
   
3. 백업을 저장할 위치를 선택하십시오. 화면에서 백업 저장 위치를 선택 후 [다음]을 클릭하세요.
   
   
   
   
   

   Windows 7은 사용하는 버전과 백업 파일을 저장할 수 있는 공간에 따라 백업 파일 저장 위치 선택이 달라질 수 있습니다. Windows 7 Professional, Windows 7 Enterprise, Windows 7 Ultimate 버전은 네트워크 위치에 저장을 눌러서 네트워크 위치에 백업 파일을 저장할 수 있습니다. 백 업저장 위치는 Windows 가 설치된 드라이브를 제외한 1GB 보다 큰 플래시 드라이브, 모드 내부 및 외부 드라이브를 사용할 수 있습니다. 만약 백업 저장 위치에 사용 가능한 저장 공간이 나오지 않는다면 1GB 이상의 플래시 드라이브 혹은 내,외부 드라이브를 연결 해 주십시오.

4. 백업 대상을 선택하십시오. 화면에서 자동 선택과 직접 선택중에서 선택하여 진행 할 수 있습니다. 여기서는 예로 [직접 선택]을 클릭하고 [다음]을 클릭합니다.
   
   
   
   
5. 백업에 포함할 수 있는 항목이 나타나면 확인란을 선택하여 백업 대상을 설정한 후 [다음]을 클릭하세요.
   
   
   
   
   

   백업 대상 선택 화면에서 시스템 예약, (C:)드라이브의 시스템 이미지 포함의 확인란을 선택하면 컴퓨터 작동이 중지되는 경우 시스템 이미지를 사용하여 컴퓨터를 복원할 수 있습니다.

   
   
6. 백업 설정을 검토하십시오. 화면에서 앞 단계에서 설정한 백업 항목을 확인 후 [설정 저장 및 백업 실행]을 클릭하세요.
   
   
   
   
   
7. 사용자 파일 백업 또는 복원 화면에서 백업 진행 중인 것을 확인할 수 있습니다.
   
   
   
   
   
8. 백업이 완료되면 현재 설정된 백업의 상태를 확인할 수 있습니다.
   
   
   
   
   
9. [시작]
   
   , [컴퓨터]를 차례대로 클릭하여 Windows 탐색기에서 백업한 위치에 백업 파일을 확인할 수 있습니다.